Clausing Lathe
From Pumping Station One
 | |
| Owner/Loaner | Anna Yu and Ed Bennett |
|---|---|
| Serial Number | ? |
| Make/Model | 4900 Series |
| Arrival Date | 3/10/13 |
| Usability | yes |
| Contact | Anna Yu and Ed Bennett |
| Where | Machine Shop |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | yes |
| Host Area | {{{hostarea}}} |
Use
Cover the machine when not in use. Keep the cover off of the floor and allow coolant to evaporate before covering again.
A resonance sets in when the variable frequency drive is set to around 50-65%.
A red dot indicates a setting that can only be changed when the lathe is off.
Certification
Contact Anna Yu for certification. Information is on the side of the lathe.
Individuals must bring 1" diameter x 6" 6061 aluminum round for the Clausing authorization. Aluminum stock can be purchased from Mcmaster Carr (www.mcmaster.com) part number 8974K13
This tool requires Tier 1 Cold Metals Authorization
List of Currently Certified Users
| Qualified Member | Trained By | Date Trained |
|---|---|---|
| Anna Yu | Owner | |
| Ed Bennett | Owner | |
| Derek Bever | Anna Yu | |
| Everett Wilson | Anna Yu | |
| Ryan Pierce | Anna Yu | |
| Colin Parsons | Anna Yu | |
| Mike Warot | Anna Yu | |
| Tucker Tomlinson | Anna Yu | |
| Matthew Triano | Anna Yu | |
| Wayne Openlander | Ed Bennett | |
| Jesse Seay | Anna Yu | |
| Jeremy Bloyd-Peshkin | Ed Bennett | |
| Kristopher Huisinga | Anna Yu | |
| Greg Teiber | Anna Yu | 12/10/13 |
| Bart Dring | Anna Yu | 12/21/13 |
| Eric R. Klinefelter | Anna Yu | |
| Dillon Gray | Anna Yu | |
| Jason Shanfield | Anna Yu | 1/10/14 |
| Todd Allen | Anna Yu | 1/28/14 |
| Allen LeSage | Anna Yu | 1/28/14 |
| Edward Muela | Anna Yu | 5/13/14 |
| Samuel Swope | Anna Yu | 5/13/14 |
| Jay Hopkins | Anna Yu | |
| David Morton | Anna Yu | 7/22/14 |
| Thomas Wright | Anna Yu | 7/15/14 |
| Jabu Dawdu | Anna Yu | 7/29/14 |
| George Shaw | Anna Yu | 8/19/14 |
| Bryan Gleason | Anna Yu | 10/14/14 |
| Joao Santos | Anna Yu | 12/9/14 |
| Dean Anderson | Anna Yu | 12/9/14 |
Suggested Tooling
Documentation and Training Materials
Part Names, and what they do: File:Clausing10inLathe4900SeriesOperatingInstructions.pdf
Brochure File:4900-Clausing-Brochure.PDF
