Big Blasting Cabinet
From Pumping Station One
 | |
| Owner/Loaner | PS:One |
|---|---|
| Make/Model | TP Tools 976 Pro Detailer XH Abrasive Blast Cabinet |
| Arrival Date | Februrary, 2019 |
| Usability | yes |
| Contact | Ron Olson |
| Where | Hot Metal Shop |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | $2500 |
| Host Area | Hot Metals |
Information
The cabinet is located behind the curtain near the Temporary Project Area. It acts as a barrier for welding station: two
Media
The media in the cabinet is pulverized glass beads, 100-150 grit. The part number is 3386K73 from McMaster-Carr
Do not change the media without prior approval from the Hot Metal Shop host!
Use
DO NOT POINT THE GUN AT THE GLASS!
- Ensure the vacuum is plugged into the switched outlet (top left of unit) before operating.
- Do not recycle blasting media. Only add fresh media to the hopper.
- Only use approved blasting media.
- Ensure both doors are fully secured before operation.
- Use a respirator while handling media or cleaning vacuum filter.
- Do not point gun at gloves. Use screen tray for parts too small to safely hold.
Tips-n-Tricks
- If the gun does not seem to be performing well, try pressing it right against a piece of cardboard and blowing it until the media can be seen coming from the grill near the front of the machine; this clears the line
- Depending on the thickness of the material you're trying to remove, you're potentially in for a long time; grab a stool to sit or lean against and take breaks as bending over can really hurt the back after awhile
Gun Setup, Parts, and Troubleshooting
List of Currently Authorized Users
| Qualified Member | Trained By | Date |
|---|---|---|
| Sam Paris | Ron Olson | 03/30/19 |
| Jacob M. Dawson | Ron Olson | 03/30/19 |
