SawStop table saw: Difference between revisions
From Pumping Station One
Bikemandan (talk | contribs) Added tool notes. |
No edit summary |
||
| Line 11: | Line 11: | ||
|arrived = 9/1/2012 | |arrived = 9/1/2012 | ||
|doesitwork = WORKING | |doesitwork = WORKING | ||
|contact = | |contact = Adrianna McKinley | ||
|where = Woodshop | |where = Woodshop | ||
|value = $3,000.00 | |value = $3,000.00 | ||
|itemphoto=[[File:SawStop.jpg|200px]] | |itemphoto=[[File:SawStop.jpg|200px]] | ||
}} | }} | ||
==Rules== | |||
# Do not move the machine ever | |||
# Always have the dust collection on. Turn it on before you plug in the saw and off after you unplug the saw. | |||
# Never use the table as a work surface. | |||
# Always check your wood for nails or staples. If you're not sure, check the entire piece with a magnet. | |||
# If you break something, or damage the saw, contact the area host immediately. Don't let others do more damage or hurt themselves by using a broken tool. | |||
# Always dust the entire machine when you are done. Also check after every use and vacuum out the motor compartment as needed. | |||
# Always check your material on the blade before you spin up the blade. | |||
==Notes== | ==Notes== | ||
* There's an m8 hole drilled and tapped in the mitre gauge. The post from a magnetic base of our dial indicators thread in. The post may require a spacer so the threads don't stick out (use a stack of washers or a larger-than-m8 nut). | * There's an m8 hole drilled and tapped in the mitre gauge. The post from a magnetic base of our dial indicators thread in. The post may require a spacer so the threads don't stick out (use a stack of washers or a larger-than-m8 nut). | ||
