Epilog 30w Mini 24 Laser Engraver: Difference between revisions
From Pumping Station One
No edit summary |
→Safe Materials: repeating warning about vinyl, as some folks might not be thinking about PVC when they are at the fabric store. |
||
| Line 34: | Line 34: | ||
**Depron foam: Used a lot for hobby, RC aircraft, architectural models, and toys. 1/4" cuts nicely, with a smooth edge. Must be constantly monitored when cutting. | **Depron foam: Used a lot for hobby, RC aircraft, architectural models, and toys. 1/4" cuts nicely, with a smooth edge. Must be constantly monitored when cutting. | ||
**Gator foam: foam core gets burned and eaten away compared to the top and bottom hard paper shell. Not a fantastic thing to cut, but it can be cut if watched. | **Gator foam: foam core gets burned and eaten away compared to the top and bottom hard paper shell. Not a fantastic thing to cut, but it can be cut if watched. | ||
**Cloth (leather, suede, felt, hemp, cotton) They all cut well. Leather is very hard to cut, but can be if it's thinner than a belt (call it 1/8") | **Cloth (leather, suede, felt, hemp, cotton, polyester, but NEVER vinyl or pleather-- see above) They all cut well. Leather is very hard to cut, but can be if it's thinner than a belt (call it 1/8") | ||
**Magnetic Sheet material cuts beautifully | **Magnetic Sheet material cuts beautifully | ||
**NON-CHLORINE containing rubber is fine for cutting. | **NON-CHLORINE containing rubber is fine for cutting. | ||
