Olympic Glass Kiln: Difference between revisions
From Pumping Station One
Makelemonade (talk | contribs) No edit summary |
Makelemonade (talk | contribs) m →Use |
||
| Line 22: | Line 22: | ||
The heating element buzzes when first heating up. This is normal. If the buzzing comes from within the controller, please let us know, that's a sign of the relay failing. | The heating element buzzes when first heating up. This is normal. If the buzzing comes from within the controller, please let us know, that's a sign of the relay failing. | ||
DO NOT open the kiln when the temperature is above 500°. This shortens the life of the firebrick and causes firebrick grit to fall in on the glass. | |||
[[Category: Small Metals]] | [[Category: Small Metals]] | ||
[[Category:Loaned Equipment]] | [[Category:Loaned Equipment]] | ||
Revision as of 23:33, 29 January 2025
 | |
| Owner/Loaner | [Burton Kent] |
|---|---|
| Serial Number | T0642 |
| Make/Model | SQUARE 146GFE |
| Arrival Date | 1/27/2025 |
| Usability | yes |
| Contact | Burton Kent |
| Where | Small Metals Kiln Niche |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | $800 |
| Host Area | Category:Small_Metals |
Authorization
No authorization needed if you have programmed a glass kiln before. Otherwise, talk to Burton.
Use
The first two programming slots are free to use. The rest are reserved.
The manual is available here.
The heating element buzzes when first heating up. This is normal. If the buzzing comes from within the controller, please let us know, that's a sign of the relay failing.
DO NOT open the kiln when the temperature is above 500°. This shortens the life of the firebrick and causes firebrick grit to fall in on the glass.
