Consew 287RB Industrial Sewing Machine: Difference between revisions
From Pumping Station One
Created page with "{{Template:EquipmentPage |image= |owner=PS:One|model=287rb |serial=|arrived= |doesitwork=yes |contact=Lydia Miller |where=Graphic Arts and Textiles |certification=yes |ha..." |
No edit summary |
||
| Line 22: | Line 22: | ||
* To change stitch length, move the lever down and tighten screw to hold the lever in place | * To change stitch length, move the lever down and tighten screw to hold the lever in place | ||
* To change the thread, it's easiest to cut the thread from the old feed and tie the new thread to it, then run the machine for a few seconds as the thread works it way through the loops. | * To change the thread, it's easiest to cut the thread from the old feed and tie the new thread to it, then run the machine for a few seconds as the thread works it way through the loops. | ||
* When replacing the needle, be very careful to not drop the holding screw (the tiny gap between the wall and the floor near the machine seems to have a magnetic pull). If the screw is lost, look for a #5 to replace it. There should be #5 screws in the electronics area. | |||
