Slot Forge: Difference between revisions
From Pumping Station One
Tachoknight (talk | contribs) |
No edit summary |
||
| Line 7: | Line 7: | ||
|serial = SERIAL NUMBER | |serial = SERIAL NUMBER | ||
|arrived = May 2018 | |arrived = May 2018 | ||
|where = | |where = Removed | ||
|doesitwork = "yes" | |doesitwork = "yes" | ||
|contact = Hot Metals area host | |contact = Hot Metals area host | ||
Latest revision as of 15:45, 21 March 2021
 | This tool is no longer at the space. Find what actually exists at PS1 on the Equipment page.  |
| File:"IMAGENAME.JPG" (case sensitive, this is whatever you named the image when you uploaded it) | |
| Owner/Loaner | "PS:One" |
|---|---|
| Serial Number | SERIAL NUMBER |
| Make/Model | Mifco F-526 |
| Arrival Date | May 2018 |
| Usability | "yes" |
| Contact | Hot Metals area host |
| Where | Removed |
| Authorization Needed | yes |
| Hackable | "no" |
| Estimated Value | ? |
| Host Area | Hot Metals |
Status
A certification process is still being worked out, very close to completed. If you want to help with that check in with the hotmetals area host.
Safety
- Eye protection required
- Flammable Gas
- Burns
- It's loud
- you might want a respirator
Use
Prep
- Clean up, vacuum up debris that has fallen out of the exhaust duct. It's plastic-ee and smells horrid and very unhealthy when it burns.
- Stack pile-O-bricks around the slot to suit your work. The entire slot must be covered.
- Make sure there is nothing flammable on the top of the forge.
Start up
- Turn on the exhaust fan with the timer switch on the wall.
- Open the valve on the tank.
- Open the slot forge valve on the manifold on the wall.
- Press the start button on the front of the forge.
Shut Down
- Press the stop button on the front of the forge.
- Close the slot forge valve on the manifold on the wall.
- Close the valve on the tank.
- Leave an indicator that the area is hot.
This tool requires certification for use.
){kind=link}