AIM Kiln 1413: Difference between revisions
From Pumping Station One
| Line 25: | Line 25: | ||
Clear the surrounding area, at least one foot radios, of combustible material, wood, paper and especially aerosol containers. | Clear the surrounding area, at least one foot radios, of combustible material, wood, paper and especially aerosol containers. | ||
While firing, before walking away, make sure the hot sign is on the kiln and that bystander have proper warning of extreme heat. | |||
Make sure ceramic wears are cooled below 100 degrees Fahrenheit before handling. | Make sure ceramic wears are cooled below 100 degrees Fahrenheit before handling. | ||
Revision as of 18:37, 15 September 2020
 | |
| Owner/Loaner | PS1 |
|---|---|
| Serial Number | ACO7055 |
| Make/Model | 1413/2TF |
| Arrival Date | 10/2018 |
| Usability | yes |
| Contact | smallmetals@pumpingstationone.org |
| Where | Small Metals |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | ~$600-900 |
| Host Area | Small Metals |
Status
Kiln works as of 9/15/20
Authorization
Authorization is required
Safety
Use of the kiln for ceramic does not require special PPE.
Clear the surrounding area, at least one foot radios, of combustible material, wood, paper and especially aerosol containers.
While firing, before walking away, make sure the hot sign is on the kiln and that bystander have proper warning of extreme heat.
Make sure ceramic wears are cooled below 100 degrees Fahrenheit before handling.
Do not fire green-wear (raw, un-fired clay) unless completely dry.
