Big Blasting Cabinet: Difference between revisions
From Pumping Station One
Tachoknight (talk | contribs) No edit summary |
Tachoknight (talk | contribs) |
||
| Line 22: | Line 22: | ||
== Media == | == Media == | ||
The media in the cabinet is pulverized glass beads, 100-150 grit. The part number is 3386K73 from [https://www.mcmaster.com/catalog/125/2771 McMaster-Carr] | The media in the cabinet is pulverized glass beads, 100-150 grit. The part number is 3386K73 from [https://www.mcmaster.com/catalog/125/2771 McMaster-Carr] | ||
'''''Do not change the media without prior approval from the Hot Metal Shop host!''''' | |||
== Use == | == Use == | ||
Revision as of 09:52, 4 April 2019
 | |
| Owner/Loaner | PS:One |
|---|---|
| Make/Model | TP Tools 976 Pro Detailer XH Abrasive Blast Cabinet |
| Arrival Date | Februrary, 2019 |
| Usability | yes |
| Contact | Ron Olson |
| Where | Hot Metal Shop |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | $2500 |
| Host Area | Hot Metals |
Information
The cabinet is located behind the curtain near the Temporary Project Area.
Media
The media in the cabinet is pulverized glass beads, 100-150 grit. The part number is 3386K73 from McMaster-Carr
Do not change the media without prior approval from the Hot Metal Shop host!
Use
DO NOT POINT THE GUN AT THE GLASS!
- Ensure the vacuum is plugged into the switched outlet (top left of unit) before operating.
- Do not recycle blasting media. Only add fresh media to the hopper.
- Only use approved blasting media.
- Ensure both doors are fully secured before operation.
- Use a respirator while handling media or cleaning vacuum filter.
- Do not point gun at gloves. Use screen tray for parts too small to safely hold.
Gun Setup, Parts, and Troubleshooting
List of Currently Authorized Users
| Qualified Member | Trained By | Date |
|---|---|---|
| Sam Paris | Ron Olson | 03/30/19 |
| Jacob M. Dawson | Ron Olson | 03/30/19 |
