RDWorks: Difference between revisions
From Pumping Station One
Created page with "==Summary== RDWorks, or LaserWorks, is the basic software used at PS1 for controlling the BOSS LS-3655 150w Laser Engraver . It is not currently used for controlling any o..." |
No edit summary |
||
| Line 14: | Line 14: | ||
The default method generally taught to noob users is to use the "Current Position" option in the RDWorks settings, in the lower right hand corner of the RDWorks inteface, and note that the position of the green dot in RDWorks corresponds to the place where the laser will begin work on the material. There are several other ways to work, but that is the right one to learn first. | The default method generally taught to noob users is to use the "Current Position" option in the RDWorks settings, in the lower right hand corner of the RDWorks inteface, and note that the position of the green dot in RDWorks corresponds to the place where the laser will begin work on the material. There are several other ways to work, but that is the right one to learn first. | ||
=== References === | |||
* https://www.bosslaser.com/Download_pdf/Laser_WORKS_8_Install.pdf | |||
