Slot Forge: Difference between revisions
From Pumping Station One
Created page with "{{Template:EquipmentPage |owner = "PS:One" |hostarea = Hot Metals |certification = yes |hackable = "no" |model = Mifco F-526 |serial = SERIAL NUMBER |arrived = May 2018 |where..." |
No edit summary |
||
| Line 16: | Line 16: | ||
== Status == | == Status == | ||
A certification process is still being worked out. If you want to help with that check in with the | A certification process is still being worked out, very close to completed. If you want to help with that check in with the hotmetals area host. | ||
== Safety == | == Safety == | ||
*Eye protection required | |||
*Flammable Gas | |||
*Burns | |||
*It's loud | |||
*you might want a respirator | |||
== Use == | |||
Prep | |||
*Clean up, vacuum up debris that has fallen out of the exhaust duct. It's plastic-ee and smells horrid and very unhealthy when it burns. | |||
*Stack pile-O-bricks around the slot to suit your work. The entire slot must be covered. | |||
*Make sure there is nothing flammable on the top of the forge. | |||
Start up | |||
*Turn on the exhaust fan with the timer switch on the wall. | |||
*Open the valve on the tank. | |||
*Open the slot forge valve on the manifold on the wall. | |||
*Press the start button on the front of the forge. | |||
Shut Down | |||
*Press the stop button on the front of the forge. | |||
*Close the slot forge valve on the manifold on the wall. | |||
*Close the valve on the tank. | |||
*Leave an indicator that the area is hot. | |||
Revision as of 10:45, 3 November 2018
| File:"IMAGENAME.JPG" (case sensitive, this is whatever you named the image when you uploaded it) | |
| Owner/Loaner | "PS:One" |
|---|---|
| Serial Number | SERIAL NUMBER |
| Make/Model | Mifco F-526 |
| Arrival Date | May 2018 |
| Usability | "yes" |
| Contact | Hot Metals area host |
| Where | Hot Metals |
| Authorization Needed | yes |
| Hackable | "no" |
| Estimated Value | ? |
| Host Area | Hot Metals |
Status
A certification process is still being worked out, very close to completed. If you want to help with that check in with the hotmetals area host.
Safety
- Eye protection required
- Flammable Gas
- Burns
- It's loud
- you might want a respirator
Use
Prep
- Clean up, vacuum up debris that has fallen out of the exhaust duct. It's plastic-ee and smells horrid and very unhealthy when it burns.
- Stack pile-O-bricks around the slot to suit your work. The entire slot must be covered.
- Make sure there is nothing flammable on the top of the forge.
Start up
- Turn on the exhaust fan with the timer switch on the wall.
- Open the valve on the tank.
- Open the slot forge valve on the manifold on the wall.
- Press the start button on the front of the forge.
Shut Down
- Press the stop button on the front of the forge.
- Close the slot forge valve on the manifold on the wall.
- Close the valve on the tank.
- Leave an indicator that the area is hot.
This tool requires certification for use.
List of Currently Certified Users
| Qualified Member | Trained By | |
|---|---|---|
| Name of member | Who qualified them | |
| Michael Skilton | Danger committee |
){kind=link}