48in sheet metal brake maintenance: Difference between revisions
From Pumping Station One
Created page with "Maintenance page for the 48in brake is simple. On a monthly basis the brake should be inspected for damage to the fingers (notches, bent corners etc..." |
No edit summary |
||
| Line 1: | Line 1: | ||
Maintenance | Maintenance for the [[48in_sheet_metal_brake|48in brake]] is simple. On a monthly basis the brake should be inspected for damage to the fingers (notches, bent corners etc.) If the damage may cause impressions in the bent metal, the raised edge should be flattened with a whet-stone. If damage is severe the finger should be removed from service. The pivots of the mechanism should also periodically be oiled to provide smooth operation. Both these tasks should be performed on a monthly basis. Failure to perform these maintenance tasks will result in degraded operation. | ||
== maintenance log table == | == maintenance log table == | ||
Revision as of 17:18, 15 July 2017
Maintenance for the 48in brake is simple. On a monthly basis the brake should be inspected for damage to the fingers (notches, bent corners etc.) If the damage may cause impressions in the bent metal, the raised edge should be flattened with a whet-stone. If damage is severe the finger should be removed from service. The pivots of the mechanism should also periodically be oiled to provide smooth operation. Both these tasks should be performed on a monthly basis. Failure to perform these maintenance tasks will result in degraded operation.
maintenance log table
| inspect fingers for damage | oil pivots if needed | date completed | person completing |
|---|---|---|---|
| monthly | monthly | ||
