Deckel KF2 Universal Copy Mill maintenance: Difference between revisions
From Pumping Station One
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
the [[Deckel_KF2_Universal_Copy_Mill|deckel kf2]] takes regular oiling of the leadscrews via oil ports at the handwheels | the [[Deckel_KF2_Universal_Copy_Mill|deckel kf2]] takes | ||
*regular oiling of the leadscrews | |||
**leadscrew oiling should be performed monthly. | |||
**via oil ports at the handwheels | |||
**These oil ports LOOK like grease nipples, but take oil. There is a hand powered spring oiler in the cabinet. | |||
*oiling of the way surfaces | |||
**via a one-shot oiler. | |||
**Way oiling should be performed whenever the machine is used. | |||
*The linkage joints should also be oiled | |||
**on a monthly basis in order to ensure smooth operation. | |||
*Clean up and way oiling should occur at each use, however, both should also be checked on a monthly basis to ensure the machine is in good repair even when not in use. | |||
*While the tables should periodically be stoned flat, the owner (Tucker Tomlinson) asks that you have him perform this maintenance rather than doing it yourself. | |||
failure to lubricate the machine may result in binding and uneven cut pressure, resulting in snapped tool-bits. Inadequate lubrication will also result in excessive machine wear | failure to lubricate the machine may result in binding and uneven cut pressure, resulting in snapped tool-bits. Inadequate lubrication will also result in excessive machine wear | ||
== Example maintenance log table == | == Example maintenance log table == | ||
