CNC Plasma Cutter: Difference between revisions

@@ Line 21: / Line 21: @@
 === Machine Startup ===
+# Wipe down machine with clean dry clotha
+# Log in to machine
+# Turn on air
+# Make sure e-stop is depressed
+# Turn on control box
+# Start Mach3
+# Clear e-stop
+# Raise Z
+# Move torch to end of table
+# Remove torch shield and inspect for dross build up
+# Reinstall torch shield
+# Turn on plasma cutter
+# Check cutter status (Air/torch/etc)
 === Machine Shutdown ===