Revision as of 09:38, 26 April 2017

Tube Bending Class

When: 1st Sunday of the Month

Where: Hot Metals

Instructor: Tom Judge

Minimum Class size: 5

Maximum Class size: 10

10 feet of 1" 0.065" wall tubing, you can pick this up from metal supermarkets in Niles for around $15. If you find a buddy and have a way of transporting a 20' section you could save on the cutting fee.
1" Milwaukee bi-metal hole saw http://www.homedepot.com/p/Milwaukee-1-in-Hole-Dozer-Hole-Saw-49-56-9609/202327744
Roll of 1.5" PET masking tape https://www.amazon.com/Inch-Temperature-Polyester-Green-Masking/dp/B00VUDSH0Q/
Have completed cold metals tier 1 authorisation
Be authorised on bench and angle grinders
Be authorised on a welder

At the end of the class you will be authorised to use:

Revision as of 09:37, 26 April 2017 view source Amishhammer (talk \| contribs) 483 edits Created page with "= Tube Bending Class = When: 1st Sunday of the Month Where: Hot Metals Instructor: Tom Judge Minimum Class size: 5 Maximum Class size: 10 == Required items == * 10 fee..."		Revision as of 09:38, 26 April 2017 view source Amishhammer (talk \| contribs) 483 edits No edit summary Newer edit →
Line 8:		Line 8:

	Minimum Class size: 5		Minimum Class size: 5

	Maximum Class size: 10		Maximum Class size: 10