Prusa i3 3D printer: Difference between revisions
From Pumping Station One
| Line 15: | Line 15: | ||
== Status == | == Status == | ||
4/24/2017 - Printer bed is failing, could be failing print bed; | 4/24/2017 - Printer bed connector is failing, could be failing print bed causing excess current draw; install solid state relay and if problem persist replace with silicone heater bed. Uneven extrusion or slippage, possible problem with the hobbed bolt; brass and is going bad; Should be replaced with stainless steel one. | ||
11/27/16 - Tested printer with random yellow PLA, resulting in poor print quality. Suspect that PLA may be bad, as it snaps instead of bending. Going to test with different PLA. --[[User:Skynaya|Skynaya]] ([[User talk:Skynaya|talk]]) 11:36, 28 November 2016 (CST) | 11/27/16 - Tested printer with random yellow PLA, resulting in poor print quality. Suspect that PLA may be bad, as it snaps instead of bending. Going to test with different PLA. --[[User:Skynaya|Skynaya]] ([[User talk:Skynaya|talk]]) 11:36, 28 November 2016 (CST) | ||
