Shopbot PRS CNC router: Difference between revisions
From Pumping Station One
| Line 113: | Line 113: | ||
**The ShopBot computer does not have this and may not be fast enough to run it. | **The ShopBot computer does not have this and may not be fast enough to run it. | ||
**You '''MUST''' use the custom post-processor below. Otherwise, you will bypass the safety check to make sure the spindle really is running! | **You '''MUST''' use the custom post-processor below. Otherwise, you will bypass the safety check to make sure the spindle really is running! | ||
**For Windows, to install this on your local computer: | |||
***Unzip and install this in C:\Users\YourName\AppData\Roaming\Autodesk\Fusion 360 CAM\Posts | |||
***Note that AppData is often a hidden folder! | |||
***Inside Fusion 360, when you select Actions / Post Process, under Configuration Folder, hit Setup and select Use Personal Posts. | |||
***It is probably possible to put this on the Autodesk cloud and use it that way, but I don't know how. Help here would be appreciated. | |||
**For Mac, the same file should work, but we weren't able to get Fusion 360 to find it! Help here would be appreciated. | |||
====Chip Load Calculation==== | ====Chip Load Calculation==== | ||
*[http://www.pdsspindles.com/engineering-speeds Bit Parameter Overview by PDS Spindles] | *[http://www.pdsspindles.com/engineering-speeds Bit Parameter Overview by PDS Spindles] | ||
