ShapeOko2 CNC Router: Difference between revisions
From Pumping Station One
No edit summary |
|||
| Line 53: | Line 53: | ||
* Click carve. | * Click carve. | ||
* Turn on the machine by pulling up on the button. | * Turn on the machine by pulling up on the button. | ||
* Click Unlock Without Homing. ("Home Machine" will send the machine to where it thinks is home.) | * Click "Unlock Without Homing." ("Home Machine" will send the machine to where it thinks is home.) | ||
* Home the machine: align the endmill with the bottom left corner of the workpiece (or wherever you want to set as home). Bring the bit down to just touch the workpiece. | * Home the machine: align the endmill with the bottom left corner of the workpiece (or wherever you want to set as home). Bring the bit down to just touch the workpiece. | ||
** (You will need to reset the Z every operation. The machine loses Z calibration after each run, though it keeps XY home information.) | ** (You will need to reset the Z every operation. The machine loses Z calibration after each run, though it keeps XY home information.) | ||
