ShapeOko2 CNC Router: Difference between revisions
From Pumping Station One
No edit summary |
No edit summary |
||
| Line 15: | Line 15: | ||
== Status == | == Status == | ||
Operational as of January 2017. | |||
== Authorization == | == Authorization == | ||
Contact CNC Area Host for information on who conducts authorizations. If you are unable to get a response within 48hrs, post a request for authorization on the Pumping Station: One private Google Group. | Contact CNC Area Host for information on who conducts authorizations. If you are unable to get a response within 48hrs, post a request for authorization on the Pumping Station: One private Google Group. | ||
== Operation == | == Operation == | ||
=== Setup === | === Setup === | ||
* With power off, ensure that you can move the carriage smoothly without it catching or having too much play. If it skips or bumps, clear out debris with a vacuum. (The machine generates a ton of dust, so having the vacuum on hand is helpful.) | * With power off, ensure that you can move the carriage smoothly without it catching or having too much play. If it skips or bumps, clear out debris with a vacuum. (The machine generates a ton of dust, so having the vacuum on hand is helpful.) | ||
