Swag Heavy Duty Break: Difference between revisions
From Pumping Station One
Amishhammer (talk | contribs) Created page with "{{Template:EquipmentPage|owner=Tom Judge |model=SWAG Offroad HD Break |serial=N/A |arrived=Yes |doesitwork= yes |contact= Tom Judge |where=Cold Metals Area |certification=yes..." |
Amishhammer (talk | contribs) |
||
| Line 16: | Line 16: | ||
There are 2 sets of dies, the standard dies and a set of goose neck dies. | There are 2 sets of dies, the standard dies and a set of goose neck dies. | ||
== | == Gooseneck dies == | ||
These dies are for bending shallow pans or forming complex "U" bends, please use the regular dies for all standard bends. | |||
'''THE MAXIMUM THICKNESS OF MATERIAL TO BE BENT WITH THE GOOSENECK DIES IS 1/4"''' | |||
[[File:Goose-neck-dies.png]] | |||
Using the gooseneck dies you will be able to bend U shaped pieces that have maximum leg "A" that is 2.0" long and a minimum width "B" of 2.0" wide. | |||
== Authorized Users == | == Authorized Users == | ||
Revision as of 08:53, 10 February 2016
| File:None | |
| Owner/Loaner | Tom Judge |
|---|---|
| Serial Number | N/A |
| Make/Model | SWAG Offroad HD Break |
| Arrival Date | Yes |
| Usability | yes |
| Contact | Tom Judge |
| Where | Cold Metals Area |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | $400 |
| Host Area | {{{hostarea}}} |
This tool is for use in the central machinery 20 ton H-Frame press.
There are 2 sets of dies, the standard dies and a set of goose neck dies.
Gooseneck dies
These dies are for bending shallow pans or forming complex "U" bends, please use the regular dies for all standard bends.
THE MAXIMUM THICKNESS OF MATERIAL TO BE BENT WITH THE GOOSENECK DIES IS 1/4"
Using the gooseneck dies you will be able to bend U shaped pieces that have maximum leg "A" that is 2.0" long and a minimum width "B" of 2.0" wide.
Authorized Users
| Qualified Member | Trained By |
|---|---|
| Tom Judge | Owner |
| Dean Anderson | Area Host |
