Epilog 30w Mini 24 Laser Engraver: Difference between revisions
From Pumping Station One
Amishhammer (talk | contribs) No edit summary |
Amishhammer (talk | contribs) |
||
| Line 218: | Line 218: | ||
'''NB: Always return the machine back to the default configuration with a cutting bed after use.''' | '''NB: Always return the machine back to the default configuration with a cutting bed after use.''' | ||
=== Installing Attachment === | |||
# Turn machine on | |||
# Disable X/Y | |||
# Open front cover | |||
# Lower bed almost to the bottom of the machine while still allowing the catch tray to be removed | |||
# '''Turn machine off''' | |||
# Flip up rulers and remove cutting bed | |||
# Remove slide out catch tray | |||
# Install the attachment locating it in the 3 holes in the bottom of the bed '''DO NOT CONNECT PLUG YET''' | |||
# Make sure the Y axis will clear the top of the attachment, if it will not turn the machine on and lower the bed further making sure to turn it off afterwards | |||
# Connect the attachment cable to the connector in the back of the bed | |||
# Turn the machine on - the machine will zero home over the top of the attachment | |||
Reverse steps to uninstall. | |||
=== Usage notes === | |||
* '''DO NOT USE AUTO FOCUS''' | |||
* 0,0 is '''TOP LEFT''' | |||
* Y axis is wrapped around the piece | |||
* Set Y size to circumference of piece - measure with soft tape or string/ribbon/etc | |||
* Make sure to set print size in driver to same as art board in illustrator | |||
== Known issues == | == Known issues == | ||
