Jet Wood Lathe: Difference between revisions
From Pumping Station One
m title cleanup |
Clarified some rules, formatting |
||
| Line 2: | Line 2: | ||
{{Template:EquipmentPage | {{Template:EquipmentPage | ||
|image = | |image = | ||
|owner = | |owner = Joe Nudell | ||
|serial = NAN | |serial = NAN | ||
|certification = yes | |certification = yes | ||
| Line 9: | Line 9: | ||
|arrived = 6/1/14 | |arrived = 6/1/14 | ||
|doesitwork = yes | |doesitwork = yes | ||
|contact = | |contact = Joe Nudell | ||
|where = Woodshop | |where = Woodshop | ||
|value = 800 | |value = 800 | ||
| Line 17: | Line 17: | ||
== Personal Protective Equipment == | == Personal Protective Equipment == | ||
* Face shield | * Face shield (not just safety glasses) must be worn. | ||
* Long and loose hair must be contained. | * Long and loose hair must be contained. | ||
* Do not wear gloves or loose clothing. | * Do not wear gloves or loose clothing. | ||
* Remove watches,rings,and other jewelry. | * Remove watches, rings, and other jewelry. | ||
* Don't wear or roll up long sleeves. | * Don't wear or roll up long sleeves. | ||
* Dust protection may be required. | * Dust protection may be required. | ||
== Pre-Operational Safety Checks == | == Pre-Operational Safety Checks == | ||
*Locate and ensure you are familiar with all machine operations and controls. | * Locate and ensure you are familiar with all machine operations and controls. | ||
*Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or faulty. | * Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or faulty. | ||
*Workpiece must be securely fastened to face plate, chuck or between centers | * Workpiece must be securely fastened to face plate, chuck or between centers. | ||
* Rotate the workpiece by hand to check clearance between tool rest and bed. | |||
*Rotate the workpiece by hand to check clearance between tool rest and bed. | * Ensure the cutting tools are sharp and in good condition. | ||
*Ensure the cutting tools are sharp and in good condition. | * Start the dust extraction unit before using the machine. | ||
*Start the dust extraction unit before using the machine. | * Make sure all clamping handles are tight. | ||
*Make sure all clamping handles are tight | |||
== Operational Safety Checks == | == Operational Safety Checks == | ||
*Before making adjustments, switch off and bring the machine to a complete standstill. | * Adjust speed to suit the diameter of the work and turning operation (IMPORTANT - *never* adjust speed while the lathe is off!) | ||
*Keep the tool rest adjusted close to the work and at the correct height | * Before making adjustments (apart from speed), switch off and bring the machine to a complete standstill. | ||
* Keep the tool rest adjusted close to the work and at the correct height. | |||
*Stop the lathe and remove all tool rests before sanding. | * Stop the lathe and remove all tool rests before sanding. | ||
== Ending Operations and Cleaning Up == | == Ending Operations and Cleaning Up == | ||
*Switch off the machine when work completed. | * Switch off the machine when work completed. | ||
*Return all chisels and other tools to racks. | * Return all chisels and other tools to racks. | ||
*Leave the machine in a safe, clean and tidy state. | * Leave the machine in a safe, clean and tidy state. | ||
== | == Potential Hazards and Injuries == | ||
*Eye injuries from flying debris or defective timber. | * Eye injuries from flying debris or defective timber. | ||
*Hair/clothing getting caught in moving machine parts. | * Hair/clothing getting caught in moving machine parts. | ||
*Airborne dust. | * Airborne dust. | ||
== Do == | == Do == | ||
* Rough cut the workpiece as close as possible to the finished shape before installing it. | * Rough cut the workpiece as close as possible to the finished shape before installing it. | ||
* Check your workpiece for flaws, cracks, knots etc.and test glue joints before mounting the workpiece on machine. | * Check your workpiece for flaws, cracks, knots etc. and test glue joints before mounting the workpiece on machine. | ||
* Use the lowest speed when starting a new workpiece. | * Use the lowest speed when starting a new workpiece. | ||
* Remove the tool rest before sanding or polishing. | * Remove the tool rest before sanding or polishing. | ||
| Line 60: | Line 58: | ||
* Drive the workpiece into the drive center while the drive center is in the headstock. | * Drive the workpiece into the drive center while the drive center is in the headstock. | ||
**Set the drive center into the workpiece with a soft mallet prior to installing it on the headstock. | **Set the drive center into the workpiece with a soft mallet prior to installing it on the headstock. | ||
* Touch your project by hand while the lathe is running | |||
Revision as of 14:04, 27 October 2014
| Owner/Loaner | Joe Nudell |
|---|---|
| Serial Number | NAN |
| Make/Model | Jet 1236 |
| Arrival Date | 6/1/14 |
| Usability | yes |
| Contact | Joe Nudell |
| Where | Woodshop |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | 800 |
| Host Area | {{{hostarea}}} |
This tool requires certification for use.
Personal Protective Equipment
- Face shield (not just safety glasses) must be worn.
- Long and loose hair must be contained.
- Do not wear gloves or loose clothing.
- Remove watches, rings, and other jewelry.
- Don't wear or roll up long sleeves.
- Dust protection may be required.
Pre-Operational Safety Checks
- Locate and ensure you are familiar with all machine operations and controls.
- Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or faulty.
- Workpiece must be securely fastened to face plate, chuck or between centers.
- Rotate the workpiece by hand to check clearance between tool rest and bed.
- Ensure the cutting tools are sharp and in good condition.
- Start the dust extraction unit before using the machine.
- Make sure all clamping handles are tight.
Operational Safety Checks
- Adjust speed to suit the diameter of the work and turning operation (IMPORTANT - *never* adjust speed while the lathe is off!)
- Before making adjustments (apart from speed), switch off and bring the machine to a complete standstill.
- Keep the tool rest adjusted close to the work and at the correct height.
- Stop the lathe and remove all tool rests before sanding.
Ending Operations and Cleaning Up
- Switch off the machine when work completed.
- Return all chisels and other tools to racks.
- Leave the machine in a safe, clean and tidy state.
Potential Hazards and Injuries
- Eye injuries from flying debris or defective timber.
- Hair/clothing getting caught in moving machine parts.
- Airborne dust.
Do
- Rough cut the workpiece as close as possible to the finished shape before installing it.
- Check your workpiece for flaws, cracks, knots etc. and test glue joints before mounting the workpiece on machine.
- Use the lowest speed when starting a new workpiece.
- Remove the tool rest before sanding or polishing.
Don't
- Drive the workpiece into the drive center while the drive center is in the headstock.
- Set the drive center into the workpiece with a soft mallet prior to installing it on the headstock.
- Touch your project by hand while the lathe is running
List of Currently Certified Users
| Qualified Member | Trained By |
|---|
