DoAll Bandsaw

DoAll Bandsaw

Owner/Loaner	PS:One
Serial Number	45-55525
Make/Model	DoAll 16-2
Arrival Date	9/19/14
Usability	soon
Contact	Dean Anderson
Authorization Needed	yes
Hackable	no
Estimated Value	900
Host Area	{{{hostarea}}}

This tool requires certification for use.

Specifications

Capacity	16" from the blade to the column
Blade Size	120" blade. Width can be up to 1". Each blade width requires a set of four hardened steel guides. We don't have guides for blades wider than 1/2".
Blade Speed	approximately 45 to 1600 FPM, continuously variable.
Power	240V, 3 phase
Weight	1500-2000 pounds
Mfg. Date	1955

Blades

Installed:

To-Do

Install new blade.

Change oil in transmission.

Replace thrust bearings in blade guide.

Blade welder is missing the grinder motor. The welder has not been tested. The 20 amp plug/outlet may not be sufficient.

Maintenance

Description	Frequency	Lubricant	Instructions	History
Gear Box		manual says 16-2: SAE 10 motor oil, 1612: SAE 20 ; DoAll support says use SAE 20 motor oil
Reeves drive shaft (oil cup)		1612: SAE 10

Equipment

Item	Description	Supplier	Cost
Guide thrust bearing	626ZZ 6x19x6mm (2 required)

List of Currently Certified Users

Qualified Member	Trained By
Dean Anderson
Everett Wilson	Dean Anderson