Epilog 30w Mini 24 Laser Engraver: Difference between revisions
From Pumping Station One
→Safe Materials: PTFE is not safe for cutting |
|||
| Line 55: | Line 55: | ||
* '''Coated Carbon Fiber:''' Again, it's a mix of two materials. Thin carbon fiber mat can be cut, with some fraying. However, once coated with epoxy it will emit noxious fumes. | * '''Coated Carbon Fiber:''' Again, it's a mix of two materials. Thin carbon fiber mat can be cut, with some fraying. However, once coated with epoxy it will emit noxious fumes. | ||
* Silhouette '''magnet paper''' (sold by Inventables by example): it likely contains chlorine. Emits HCl and nasty chlorinated compounds when cut! Don't ever cut this material as it will ruin the optics, cause the metal of the machine to corrode, and ruin the motion control system. | * Silhouette '''magnet paper''' (sold by Inventables by example): it likely contains chlorine. Emits HCl and nasty chlorinated compounds when cut! Don't ever cut this material as it will ruin the optics, cause the metal of the machine to corrode, and ruin the motion control system. | ||
* '''PTFE:''', also known as '''Teflon''' or any fluorinated polymer it will releases nasty fluorinated compounds (bad for you) and sublimate then deposit on the lenses (likely destroying them). | |||
== '''Test for material''' == | == '''Test for material''' == | ||
