Shopbot PRS CNC router

Shopbot PRS CNC router

File:No
Owner/Loaner	PS:One
Serial Number	TBD.
Make/Model	Shopbot PRS
Arrival Date	2014
Usability	Not Yet
Contact	Elizabeth, Bart
Where	TBD
Authorization Needed	yes
Hackable	no
Estimated Value	$16000
Host Area	{{{hostarea}}}

Documentation

File:Shopbotassembly.pdf

Certification Checklist

This is here as a checklist for proctors to follow when certifying people. It can also help remind you of things after you are certified. Just reading this does not certify you.

• How to get certified

• Safety

• What can go wrong (and what to do)

• Daily Maintenance
  • Spindle bearing warm up.
    • The "C5" warm up routine should be run on the first job of the day. It runs the spindle at 3 speeds for 3 minutes each to warm up the bearings. (When it doubt, warm it up)

• Extended Maintenance
  • Grease the racks
  • Use Grease type: TBD

• Machine Control

• CAM Software

• Running your Job

• Waste Board and clamping

• Collets, Bits, Feeds and Speeds
  • Collets
    • We currently have collets for 1/2, 1/4, 3/16 and 1/8" shank bits.
    • Try to keep them clean and store them away from dust between uses. Dust between the gaps will produce runout.

• ShopBot should not be used for...
  • Metals other than aluminum
  • Ripping lumber

• How to leave the machine (be excellent)
  • Post a picture please :-)

Authorized Users

Qualified Member	Trained By
Elizabeth Koprucki	Danger Committee
Bart Dring	Danger Committee
Ryan Pierce	Danger Committee
Nathan Ellis	Danger Committee