Shopbot PRS CNC router: Difference between revisions
From Pumping Station One
m Robot: Cosmetic changes |
|||
| Line 17: | Line 17: | ||
[[File:Shopbotassembly.pdf]] | [[File:Shopbotassembly.pdf]] | ||
== Certification Checklist== | == Certification Checklist == | ||
This is here as a checklist for proctors to follow when certifying people. | This is here as a checklist for proctors to follow when certifying people. It can also help remind you of things after you are certified. Just reading this does not certify you. | ||
*How to get certified | * How to get certified | ||
*Safety | * Safety | ||
*What can go wrong (and what to do) | * What can go wrong (and what to do) | ||
*Daily Maintenance | * Daily Maintenance | ||
**Spindle bearing warm up. | ** Spindle bearing warm up. | ||
*** The "C5" warm up routine should be run on the first job of the day. | *** The "C5" warm up routine should be run on the first job of the day. It runs the spindle at 3 speeds for 3 minutes each to warm up the bearings. | ||
*Extended Maintenance | * Extended Maintenance | ||
**Grease the racks | ** Grease the racks | ||
**Use Grease type: TBD | ** Use Grease type: TBD | ||
*Machine Control | * Machine Control | ||
*CAM Software | * CAM Software | ||
*Running your Job | * Running your Job | ||
*Waste Board and clamping | * Waste Board and clamping | ||
*Collets, Bits, Feeds and Speeds | * Collets, Bits, Feeds and Speeds | ||
**Collets | ** Collets | ||
***We currently have collets for 1/2, 1/4, 3/16 and 1/8" shank bits. | *** We currently have collets for 1/2, 1/4, 3/16 and 1/8" shank bits. | ||
***Try to keep them clean and store them away from dust between uses. | *** Try to keep them clean and store them away from dust between uses. Dust between the gaps will produce runout. | ||
*ShopBot should not be used for... | * ShopBot should not be used for... | ||
**Metals other than aluminum | ** Metals other than aluminum | ||
**Ripping lumber | ** Ripping lumber | ||
*How to leave the machine (be excellent) | * How to leave the machine (be excellent) | ||
**Post a picture please :-) | ** Post a picture please :-) | ||
== Authorized Users == | == Authorized Users == | ||
Revision as of 08:06, 13 June 2014
 | This tool is currently broken, please contact the area host for more information. |
| File:No | |
| Owner/Loaner | PS:One |
|---|---|
| Serial Number | TBD. |
| Make/Model | Shopbot PRS |
| Arrival Date | 2014 |
| Usability | Not Yet |
| Contact | Elizabeth, Bart |
| Where | TBD |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | $16000 |
| Host Area | {{{hostarea}}} |
Documentation
Certification Checklist
This is here as a checklist for proctors to follow when certifying people. It can also help remind you of things after you are certified. Just reading this does not certify you.
- How to get certified
- Safety
- What can go wrong (and what to do)
- Daily Maintenance
- Spindle bearing warm up.
- The "C5" warm up routine should be run on the first job of the day. It runs the spindle at 3 speeds for 3 minutes each to warm up the bearings.
- Spindle bearing warm up.
- Extended Maintenance
- Grease the racks
- Use Grease type: TBD
- Machine Control
- CAM Software
- Running your Job
- Waste Board and clamping
- Collets, Bits, Feeds and Speeds
- Collets
- We currently have collets for 1/2, 1/4, 3/16 and 1/8" shank bits.
- Try to keep them clean and store them away from dust between uses. Dust between the gaps will produce runout.
- Collets
- ShopBot should not be used for...
- Metals other than aluminum
- Ripping lumber
- How to leave the machine (be excellent)
- Post a picture please :-)
Authorized Users
| Qualified Member | Trained By |
|---|---|
| Elizabeth Koprucki | Danger Committee |
| Bart Dring | Danger Committee |
| Ryan Pierce | Danger Committee |
| Nathan Ellis | Danger Committee |
