T-962 Reflow Oven: Difference between revisions
From Pumping Station One
No edit summary |
m Robot: Cosmetic changes |
||
| Line 1: | Line 1: | ||
{{Template:EquipmentPage|owner=Rob Riggs|model=T-962 Reflow Oven |serial=F1306748|arrived=2014 |doesitwork=yes|contact=Rob Riggs|where=Electric Avenue|certification=no |hackable=no |value=about $250|image = T-962_Reflow_Oven.jpeg}}<br /> | |||
This is an 800W 180×235mm infrared SMD reflow oven. It has a number of reflow profiles available and can be programmed with a custom profile. Profile 1 is a fairly standard profile which works pretty well for lead-free solder paste. | |||
The oven has been modified with the hacks documented by [http://www.instructables.com/id/T962A-SMD-Reflow-Oven-FixHack/ this Instructable]. | |||
Step 2 of the hack was done with a [http://digistump.com/products/1 Digispark USB Development Board]. You can hear the fan pulse when the heating elements are on. | |||
Be sure to read the manual before using it. [[File:T-962_INFRARED_IC_HEATER_User_Manual.pdf]] | |||
[[Category:Electronics Equipment]] | |||
Revision as of 18:29, 17 March 2014
 | |
| Owner/Loaner | Rob Riggs |
|---|---|
| Serial Number | F1306748 |
| Make/Model | T-962 Reflow Oven |
| Arrival Date | 2014 |
| Usability | yes |
| Contact | Rob Riggs |
| Where | Electric Avenue |
| Authorization Needed | no |
| Hackable | no |
| Estimated Value | about $250 |
| Host Area | {{{hostarea}}} |
This is an 800W 180×235mm infrared SMD reflow oven. It has a number of reflow profiles available and can be programmed with a custom profile. Profile 1 is a fairly standard profile which works pretty well for lead-free solder paste.
The oven has been modified with the hacks documented by this Instructable.
Step 2 of the hack was done with a Digispark USB Development Board. You can hear the fan pulse when the heating elements are on.
Be sure to read the manual before using it. File:T-962 INFRARED IC HEATER User Manual.pdf
