AlarmLock PDL3000

AlarmLock PDL3000

Owner/Loaner	PS:One
Serial Number	{{{serial}}}
Make/Model	PDL3000
Arrival Date	{{{arrived}}}
Usability	yes
Contact	{{{contact}}}
Where	Installed on Front Door
Authorization Needed	yes
Hackable	yes
Estimated Value	~$1000
Host Area	{{{hostarea}}}

Getting an Access Code

In order to get the access code, you should A: be a paying member in good standing with the organization, and B: have your id checked by 2 board members. The best time to get your ID checked is at a general meeting which occur every Tuesday at 8:00pm.

Reprogramming the Lock

The full manual is available at http://www.alarmlock.com/images/pdf/ETPDL_PDL3X00_WI1021C.07_PROG.pdf

Sharing the door code

• Please don't share the door code with non-members
• If you don't have the ability to verify membership status, please don't give out the door code.

Changing the door code

Door code logic: each allowed code is associated with a user id between the numbers 12 and 50, inclusive.

The door codes are documented on a User Code Record Sheet that is stored in the safe.

Programming the door

{MASTER CODE} A

You are now in program mode until you hold a button for 3 seconds.

Adding

A 2 A {User ID} A {CODE} *

Deleting =

A 2 A {USER ID} *

Erasing All Programing

1. Remove battery
2. Hold down A for 10 seconds (drain the capaciters)
3. Reinstall Battery
4. withing 5 seconds of hearing 3 beeps, Hold A until it beeps more
5. The lock is now reset, the master programming code is now the default.