Miller XMT 304 CC Welder: Difference between revisions
From Pumping Station One
No edit summary |
Fitterdave (talk | contribs) |
||
| Line 42: | Line 42: | ||
* [http://www.millerwelds.com/resources/tech_tips/TIG_tips/index.html general how-to guide] | * [http://www.millerwelds.com/resources/tech_tips/TIG_tips/index.html general how-to guide] | ||
* [http://en.wikipedia.org/wiki/Gas_tungsten_arc_welding The Wikipedia] | * [http://en.wikipedia.org/wiki/Gas_tungsten_arc_welding The Wikipedia] | ||
* [http://www.ndt-ed.org/EducationResources/CommunityCollege/Radiography/TechCalibrations/RadiographInterp.htm X-ray scans and weld problems ] | |||
Revision as of 13:05, 12 February 2014
 | |
| Owner/Loaner | Dave Schact |
|---|---|
| Serial Number | LA119540 |
| Make/Model | Miller XMT 304 CC |
| Arrival Date | November 2013 |
| Usability | yes |
| Contact | Fitterdave |
| Where | Welding Lab |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | $4800 |
| Host Area | {{{hostarea}}} |
NOTE
This is an entirely different welder from the MIG, Flux Core, and Spool machine.
Just because you are certified on those, does not mean you are certified on this. PLEASE seek instruction before using this machine.
System Configuration
- Weldmark 150A TIG Torch Set up (Air cooled)
- Single Phase Power Connection
List of Currently Certified Users
| Qualified Member | Trained By |
|---|---|
| Dave Schact | Pipefitter/ Pipe Welder |
| Ryan Pierce | Dave Schact |
