Beer Church: Difference between revisions

From Pumping Station One
No edit summary
No edit summary
Line 19: Line 19:
* Wine bottles (Evan)
* Wine bottles (Evan)
* Wine Carboy (Evan)
* Wine Carboy (Evan)
* 2 5 gal glass carboys (Ryan Pierce)
* 3 Keggles (Pumping Station: One equipment)
* 3 Keggles (Pumping Station: One equipment)
* Wort Chiller Coil (Ryan Pierce)
* Wort Chiller Coil (Ryan Pierce)
Line 26: Line 27:
* Mini Fridge for temperature control (Anthony Barker)
* Mini Fridge for temperature control (Anthony Barker)
* Air conditioner for temperature control (Ryan Pierce)
* Air conditioner for temperature control (Ryan Pierce)


====Dispensing====
====Dispensing====
Line 55: Line 57:


* http://m.whitehouse.gov/blog/2012/09/01/ale-chief-white-house-beer-recipe
* http://m.whitehouse.gov/blog/2012/09/01/ale-chief-white-house-beer-recipe
==Hardware and Software ==
===Chillmon===
* Have Chillmon persist state (temperature set point, PID constants)
* Rebuild Chillmon on Occidentalis
* Configure Chillmon application to use shared account
* Replace temp sensors with DS18B20 for more accuracy
* EPICS integration:
** Expose Chillmon control variables to EPICS
** Create EPICS control screens
** Investigate EPICS web interface
** Display screen for Chillmon
===Brewing Station: One===
* Electrical insulation of contactor terminals
* Experiment: When the chiller turns off, does it blow hot air into the fermenting space?
* Experiment: In the winter, will the shop drop below our fermentation temperatures, and will we need a heater?
* Real time monitoring of temperature, specific gravity
===Brewing===
* Modify Keggles for brewing
* Build RIMS or HERMS
** Propane solenoid, thermocouple, and igniter under PID control (Arduino)
** Pump, flow meter run by microcontroller (Arduino)
** Multiple temperature probes (Arduino)
** Safety gear:
*** Alarm system (stuck flow, propane flame blew out) (Arduino)
*** Emergency shut off switch
** Raspberry Pi controlling the above via EPICS
===Dispensing===
* We have a donated refrigerator; convert to kegerator
** Determine location of critical components so we can safely make cutouts for beverage lines without destroying anything
** Build internal structure to hold Cornelius kegs
** Modify thermostat to keep beer at cellar temperature. (A second Chillmon?)
** Consider plumbing water line for water dispenser / ice maker.
* Add draft tower to the PS:One bar
** Build draft tower and faucet system
** Engineer beverage line and faucet chilling


==Resources==
==Resources==
Line 61: Line 107:
* http://www.popularmechanics.com/home/how-to-plans/metalworking/4323694 - Some more elaborate brewing setups.
* http://www.popularmechanics.com/home/how-to-plans/metalworking/4323694 - Some more elaborate brewing setups.
* http://www.winning-homebrew.com/diy.html - Detailed plans on constructing a single tier RIMS system, including burner control, pumps, and automatic sparging.
* http://www.winning-homebrew.com/diy.html - Detailed plans on constructing a single tier RIMS system, including burner control, pumps, and automatic sparging.
* http://www.aps.anl.gov/epics/ - EPICS, an Experimental Physics Industrial Control System used by the APS at Argonne, as well as numerous other labs. If it can control a particle accelerator, it can control beer!


==Links==
==Links==
* Photos - http://cons.truct.org/album/beerchurch
* Photos - http://cons.truct.org/album/beerchurch
* Code for brewing monitoring that's installed - https://github.com/eastein/chillmon
* Code for brewing monitoring that's installed - https://github.com/eastein/chillmon
* Chillmon Fermenting Status - http://spacemon.pumpingstationone.org:8008


[[Category:Interest_Groups]]
[[Category:Interest_Groups]]