Biosensor Array Body Temperature: Difference between revisions
From Pumping Station One
| Line 10: | Line 10: | ||
** Fewer external components. | ** Fewer external components. | ||
** 1-wire library doesn't interfere with the present, interrupt driven, main Arduino sketch structure. | ** 1-wire library doesn't interfere with the present, interrupt driven, main Arduino sketch structure. | ||
* Without a bare PCB requiring an enclosure, we have been able to shrink the sensor size and mount it, directly, onto the end of | * We have selected a shielded, 5 conductor, cable from Newark Electronics (www.newark.com) to connect the sensor to the biosensor array base unit. | ||
* Without a bare PCB requiring an enclosure, we have been able to shrink the sensor size and mount it, directly, onto the end of the multi-conductor cable. Heatshrink tubing is used to seal the connecton between the sensor and the cable. | |||
* The other end of the sensor cable is connected to a four conductor, 3.5mm, audio plug which connects to a female, four conductor, panel mounted 3.5mm audio socket on the base biosensor array unit. | * The other end of the sensor cable is connected to a four conductor, 3.5mm, audio plug which connects to a female, four conductor, panel mounted 3.5mm audio socket on the base biosensor array unit. | ||
* Wiring color convention: | * Wiring color convention: | ||
