Biosensor Array Body Temperature: Difference between revisions
From Pumping Station One
Update with version 2.0 info |
|||
| Line 9: | Line 9: | ||
** 1-wire library doesn't interfere with the present, interrupt driven, main Arduino sketch structure. | ** 1-wire library doesn't interfere with the present, interrupt driven, main Arduino sketch structure. | ||
* Without a bare PCB requiring an enclosure, we have been able to shrink the sensor size and mount it, directly, onto the end of a multi-conductor cable. Heatshrink tubing is used to seal the connecton between the sensor and the cable. | * Without a bare PCB requiring an enclosure, we have been able to shrink the sensor size and mount it, directly, onto the end of a multi-conductor cable. Heatshrink tubing is used to seal the connecton between the sensor and the cable. | ||
* The other end of the sensor cable is connected to a four conductor, 3.5mm, | * The other end of the sensor cable is connected to a four conductor, 3.5mm, audio plug which connects to a female, four conductor, panel mounted 3.5mm audio socket on the base biosensor array unit. | ||
===Version 1.0=== | ===Version 1.0=== | ||
