Eclipse Scroll Saw: Difference between revisions
From Pumping Station One
No edit summary |
|||
| Line 3: | Line 3: | ||
|certification = no" | |certification = no" | ||
|hackable = no | |hackable = no | ||
|model = | |model = 2006 | ||
|serial = | |serial = 180 | ||
|arrived = 2019 | |arrived = 2019 | ||
|where = Cold Metals | |where = Cold Metals | ||
Revision as of 16:28, 2 February 2021
 | This tool is currently broken, please contact the area host for more information. |
 | |
| Owner/Loaner | PS:One |
|---|---|
| Serial Number | 180 |
| Make/Model | 2006 |
| Arrival Date | 2019 |
| Usability | no |
| Contact | Jim Brink |
| Where | Cold Metals |
| Authorization Needed | no" |
| Hackable | no |
| Estimated Value | $999 |
| Host Area | Cold Metals |
Use
This machine is currently under review ( Jan 2021 ) it may be worth saving if we can resolve the problems. - Jim B
For scroll saw work
Safety Instructions: -Turn off,when not in use. -Remove clamp tool from lower blade clamp before operation -Stay alert. Always focus closely on what you are doing. Do not operate the saw when you are tired. - Keep guards in place. Make sure guards are in working order and in proper adjustment and alignment. -Use of a dust mask and safety glasses are recommended. Never reach under the table while the saw is running. - If an extension cord is used, be sure it is grounded and the wire gauge is correct for it’s length to handle 18 amps.
Note
- parts list.
- control board (KBWD-13) manual.
