SawStop table saw: Difference between revisions
From Pumping Station One
Garynhouse (talk | contribs) No edit summary |
Garynhouse (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
{{Template:EquipmentPage | {{Template:EquipmentPage | ||
|owner = PS:One | |owner = PS:One | ||
| Line 5: | Line 4: | ||
|hackable = NO | |hackable = NO | ||
|model = Model PCS31230 3.0HP 220V | |model = Model PCS31230 3.0HP 220V | ||
|serial = | |serial = NA | ||
|arrived = 9/1/2012 | |arrived = 9/1/2012 | ||
|doesitwork = | |doesitwork = yes | ||
|contact = Wood Shop Area Host | |contact = Wood Shop Area Host | ||
|where = Wood Shop | |where = Wood Shop | ||
| Line 41: | Line 40: | ||
Repaired and in working order as of 11/9/2015 | Repaired and in working order as of 11/9/2015 | ||
oops on 9/30/2018, someone reported on googlegroups that Chalkpaper on ply wood caused the brake to engage.. | |||
10-5-18 reports of Elevator not working | |||
== How to Become an Authorized Proctor == | == How to Become an Authorized Proctor == | ||
Contact Wood Shop Area Host Eric Beauchamp. | Contact Wood Shop Area Host Eric Beauchamp. | ||
= Rules = | = Rules = | ||
| Line 122: | Line 53: | ||
# Always have the dust collection on. Turn it on before you plug in the saw and off after you unplug the saw. | # Always have the dust collection on. Turn it on before you plug in the saw and off after you unplug the saw. | ||
# Always check your material on the blade before you spin up the blade. If the light turns red, DO NOT CUT. | # Always check your material on the blade before you spin up the blade. If the light turns red, DO NOT CUT. | ||
# Always check your wood for nails or staples. If you're not sure, check the entire piece with | # Always check your wood for nails or staples. If you're not sure, check the entire piece with a magnet. | ||
# If you break something, or damage the saw, contact the area host immediately | # If you break something, or damage the saw, contact the area host immediately. Don't let others do more damage or hurt themselves by using a broken tool. | ||
# Always dust the entire machine when you are done. Also check the motor compartment after every use and vacuum out as needed. | # Always dust the entire machine when you are done. Also check the motor compartment after every use and vacuum out as needed. | ||
| Line 149: | Line 80: | ||
This saw is equipped with a safety feature that will (hopefully) stop the blade when it contacts something conductive-- like your hand. However, that means you normally can't cut conductive things with this saw or you will trigger the safety brake. This is good if it was your hand in the way, but it also destroys the sawblade and requires installation of a replacement part that costs $70+ every time. And the saw will be down until the replacement can be installed. | This saw is equipped with a safety feature that will (hopefully) stop the blade when it contacts something conductive-- like your hand. However, that means you normally can't cut conductive things with this saw or you will trigger the safety brake. This is good if it was your hand in the way, but it also destroys the sawblade and requires installation of a replacement part that costs $70+ every time. And the saw will be down until the replacement can be installed. | ||
Conductive materials such as aluminum and other metals, carbon fiber materials, mirrored acrylic, carbon-filled materials, etc. will typically cause the brake to activate. | According to the owner's manual: "Conductive materials such as aluminum and other metals, carbon fiber materials, '''mirrored acrylic''', carbon-filled materials, etc. will typically '''cause the brake to activate'''." [Emphasis added.] | ||
Other things that may trigger the brake include wet wood, and wood with embedded nails or staples. Lexan and green pressure-treated wood reportedly can also be a problem. That is why the rules instruct you to check your material on the side of the blade before spinning it up, and to check your wood for nails or staples! | |||
Other things that may trigger the brake include wet wood, and wood with embedded nails or staples. Lexan and green pressure-treated wood reportedly can also be a problem. | |||
== Notes == | == Notes == | ||
| Line 194: | Line 111: | ||
|- | |- | ||
|[[User:Meistertek|Dan Meyer]] | |[[User:Meistertek|Dan Meyer]] | ||
| | |Sean Blaszak | ||
| | | | ||
|- | |- | ||
| Line 1,935: | Line 1,852: | ||
| 7/12/18 | | 7/12/18 | ||
|- | |- | ||
| Aaron Hale | |||
| Aaron Hale | |||
| Ralph Brendler | | Ralph Brendler | ||
| 7/26/18 | | 7/26/18 | ||
| Line 1,964: | Line 1,873: | ||
|- | |- | ||
| Farsheed Hamidi-Toosi | | Farsheed Hamidi-Toosi | ||
| Paul V | | Paul V | ||
| 9/27/18 | | 9/27/18 | ||
| Line 1,975: | Line 1,880: | ||
| 10/4/18 | | 10/4/18 | ||
|- | |- | ||
[[Category:Shop Equipment]] | [[Category:Shop Equipment]] | ||
[[Category:Fabrication]] | [[Category:Fabrication]] | ||
[[Category:Wood Shop]] | [[Category:Wood Shop]] | ||
[[Category:Certification Clarification Needed]] | [[Category:Certification Clarification Needed]] | ||
