Belovac Vacuum Forming Machine: Difference between revisions
From Pumping Station One
No edit summary |
No edit summary |
||
| Line 101: | Line 101: | ||
# Pull Material frame forward (towards front/away from heaters) | # Pull Material frame forward (towards front/away from heaters) | ||
# Inspect Plastic is ready (sufficiently heated/soft) | # Inspect Plastic is ready (sufficiently heated/soft) | ||
# push lever to raise vacuum bed/platen | |- | ||
| | |||
# push lever down to raise vacuum bed/platen/platform | |||
| | |||
[[File:Bvf_platform_lever.jpg|300px]] | |||
|- | |||
| | |||
# Open Vacuum Valve | # Open Vacuum Valve | ||
# Monitor pull of material over mold | # Monitor pull of material over mold | ||
|- | |- | ||
| | | | ||
# Turn off Vacuum | # Close Vacuum Valve to Turn off Vacuum | ||
# Allow part part to sufficient time cool. This is dependent on the thickness of your material. | # Allow part part to sufficient time cool. This is dependent on the thickness of your material. | ||
# Push bed/platen/platform lever Up to lower down and pull away from part. | |||
|- | |- | ||
| | | | ||
