Universal PLS6.150D 150W Laser Engraver: Difference between revisions
From Pumping Station One
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
| serial=PLS6150DXX082911106339 | | serial=PLS6150DXX082911106339 | ||
| arrived= August 2017 | | arrived= August 2017 | ||
| doesitwork= | | doesitwork=no | ||
| contact=[[CNC|Lasers Area Host]] | | contact=[[CNC|Lasers Area Host]] | ||
| where=CNC Shop | | where=CNC Shop | ||
| Line 14: | Line 14: | ||
}} | }} | ||
== Status == | == Status == | ||
| Line 32: | Line 24: | ||
* (August 2017) Laser donated from SAIC - thank you, Anna Yu! | * (August 2017) Laser donated from SAIC - thank you, Anna Yu! | ||
== | == Authorization: How to Get Authorized == | ||
Authorization for the laser is not viral, meaning you must seek out a Volunteer Authorizer. | Authorization for the laser is not viral, meaning you must seek out a Volunteer Authorizer. | ||
There are Volunteer Authorizers that tend to run regularly scheduled authorizations. Check the calendar of events: https://pumpingstationone.org/events/ | |||
Contact the laser area host at lasers@pumpingstationone.org if you need to find an authorizer. | |||
If no authorizations are scheduled in the next 30 days, then post on the Google Group email list or contact cnc-auths@pumpingstationone.org; look for a recent thread about laser authorizations and post there. | |||
Danger Committee folks from the other laser systems should consider themselves on the Danger Committee for this bad boy, too. Let's get this thing in regular rotation, stat! | Danger Committee folks from the other laser systems should consider themselves on the Danger Committee for this bad boy, too. Let's get this thing in regular rotation, stat! | ||
| Line 43: | Line 38: | ||
* [https://docs.google.com/spreadsheets/d/11G3HMFiu8aKGAu2Eg_p9LCSjKiajoUDsriVcqi_09hU/pub?output=html#| Materials Settings Reference] | * [https://docs.google.com/spreadsheets/d/11G3HMFiu8aKGAu2Eg_p9LCSjKiajoUDsriVcqi_09hU/pub?output=html#| Materials Settings Reference] | ||
== About == | |||
The Universal Laser Systems PLS6.150D is a free-standing platform with a materials processing envelope of 32" x 18" x 9" or 5,184 in³ (813 x 457 x 229 mm or 84,950 cm³) that supports dual lasers. As a dual laser platform, the PLS6.150 can support up to two 10.6µ CO2 lasers with a power range of 10 watts to 150 watts. Additionally, it can support a single 9.3µ CO2 of 30, 50 or 75 watts. (if a 9.3u CO2 laser is installed, only one 10.6 CO2 of up to 75 watts may be installed at the same time.) | |||
This one has two 75Wlasers totaling 150W of power. | |||
The unit was donated from SAIC. | |||
== Procedures == | == Procedures == | ||
