Slot Forge: Difference between revisions

@@ Line 16: / Line 16: @@
 == Status ==
-A certification process is still being worked out. If you want to help with that check in with the small metals area host.
+A certification process is still being worked out, very close to completed. If you want to help with that check in with the hotmetals area host.
 == Safety ==
+*Eye protection required
+*Flammable Gas
+*Burns
+*It's loud
+*you might want a respirator
-*Burns
+== Use ==
-Area
+Prep
+*Clean up, vacuum up debris that has fallen out of the exhaust duct. It's plastic-ee and smells horrid and very unhealthy when it burns.
+*Stack pile-O-bricks around the slot to suit your work. The entire slot must be covered.
+*Make sure there is nothing flammable on the top of the forge.
+Start up
+*Turn on the exhaust fan with the timer switch on the wall.
+*Open the valve on the tank.
+*Open the slot forge valve on the manifold on the wall.
+*Press the start button on the front of the forge.
+Shut Down
+*Press the stop button on the front of the forge.
+*Close the slot forge valve on the manifold on the wall.
+*Close the valve on the tank.
+*Leave an indicator that the area is hot.