BOSS LS-3655 150w Laser Engraver: Difference between revisions
From Pumping Station One
"Do not cut info from http://atxhackerspace.org/wiki/Laser_Cutter_Materials" since the current do not cut list was incomplete. put the do not cut materials first. Explanations exist in the link, but I think here would be better presented with a chart. |
|||
| Line 111: | Line 111: | ||
== Material Safety & Information == | == Material Safety & Information == | ||
WARNING: Because many plastics are dangerous to cut, it is important to know what kind you are planning to use. If you are unsure of your materials composition, don’t cut it with the laser. You can request a SDS from your material supplier | WARNING: Because many plastics are dangerous to cut, it is important to know what kind you are planning to use. If you are unsure of your materials composition, don’t cut it with the laser. You can request a SDS from your material supplier for specific information on the plastic you have or are considering using. | ||
=== NEVER CUT THESE MATERIALS === | === NEVER CUT THESE MATERIALS === | ||
