CNC Plasma Cutter: Difference between revisions

@@ Line 22: / Line 22: @@
 Authorisation requirements:
-* You must bring your own material with at least 1'x1' excess for machine tuning
+* This is not a commercial machine; it was hand-built at PS1 and as such there is no website to check, nor any manual to read. You must be willing to accept the fact that the machine can be quirky and you may have to do some troubleshooting when using it (hopefully not, but ¯\_(ツ)_/¯).
-* You must be prepared for the machine to waste some material, its not perfect, be prepared for some waste
+* You should be familiar with how plasma cutters work (at the very least, read this: https://en.wikipedia.org/wiki/Plasma_cutting). If you can swing it, please get authorized on the Miller handheld plasma machine beforehand; this is not a requirement, just a useful suggestion.
+* Read all of this page about the machine: https://wiki.pumpingstationone.org/CNC_Plasma_Cutter
-Unclear: who are the authorizers and how do you contact them?
+* Read and be willing to add your experience/knowledge of using the machine here: https://wiki.pumpingstationone.org/Talk:CNC_Plasma_Cutter
 [[CNC Plasma Cutter Authorisation]] has more details.