Shopbot PRS CNC router: Difference between revisions
From Pumping Station One
Add section on uploading Fusion 360 to Fusion Cloud |
|||
| Line 113: | Line 113: | ||
**The ShopBot computer does not have this and may not be fast enough to run it. | **The ShopBot computer does not have this and may not be fast enough to run it. | ||
**You '''MUST''' use the custom post-processor below. Otherwise, you will bypass the safety check to make sure the spindle really is running! | **You '''MUST''' use the custom post-processor below. Otherwise, you will bypass the safety check to make sure the spindle really is running! | ||
**For '''Windows''', to install this on your local computer: | **For local '''Windows''', to install this on your local computer: | ||
***Unzip and install this in C:\Users\YourName\AppData\Roaming\Autodesk\Fusion 360 CAM\Posts | ***Unzip and install this in C:\Users\YourName\AppData\Roaming\Autodesk\Fusion 360 CAM\Posts | ||
***Note that AppData is often a hidden folder! | ***Note that AppData is often a hidden folder! | ||
***Inside Fusion 360, when you select Actions / Post Process, under Configuration Folder, hit Setup and select Use Personal Posts. | ***Inside Fusion 360, when you select Actions / Post Process, under Configuration Folder, hit Setup and select Use Personal Posts. | ||
**For local '''Mac''' | |||
**For '''Mac''' | |||
*** Unzip and install in Macintosh HD> Users> USERNAME> Autodesk> Fusion 360 CAM> Posts | *** Unzip and install in Macintosh HD> Users> USERNAME> Autodesk> Fusion 360 CAM> Posts | ||
*** In Fusion 360, when you select Actions > Post Process, under Settings select Personal Posts for the Source | *** In Fusion 360, when you select Actions > Post Process, under Settings select Personal Posts for the Source | ||
