User:Mct/locker

no. 16

consumables

abrasives

sand paper

count	grit	size
5	240	9" x 11"
5	500	9" x 11"
5	1000	9" x 11"
5	2500	9" x 11"

fasteners

internal

nuts

count	diameter	pitch
1	1/4"	20

washers

count	inside diameter	outside diameter
4	1/4"	5/8"

external

cap screws

count	diameter	pitch	length	shoulder
2	1/4"	20	1.25"	1/2"

wood / drywall screws

count	size
1 box	#6, 1"
many	assorted

set screws

count	contact type	thread	length
many	flat	6-32	1/8"

misc

liquids

quantity	desc	state
2 fl oz	CA accelerator	unopened
5g	super glue	opened
2 fl oz	cold bluing	unopened

safety

count	desc	state
1 pair	safety glasses	no damage
9 pair	heavy-duty nitrile gloves	unused

writing

implements

count	desc
1	king size sharpie
1	fine rollerball
3 (R, B, K)	thin permanent marker
1	mechanical pencil

paper

count	desc
1 sheaf	quad graph paper

cloth

cloth

count	desc	state
2	terry towel	new
1	terry towel	dirty
1	terry towel	dirty, torn, with chamfer shards
1 pair	socks	new
1 pair	socks	dirty
8 pads	0000 (super fine) steel wool	unused

stock metal

bars

count	length	cross-section	material
3	11"	3/8" OD round	zinc-plated steel
1	5"	1.625" OD round	6061 Al
1	4.25"	4cm x 4cm	6061 Al
1	4"	3/4" x 3"	6061 Al
3	10"	1/4" OD round	Al
1	7"	3/8" hex	6061 Al

tubes

count	length	cross-section	wall	material
1	8.25"	1.5" x 1.5" square	1/8"	6061 Al
1	6.25"	1.5" OD round	0.05"	6061 Al

misc

count	desc	material
several	street sweeper bristle	8" avg length; unrusted to rusty
1	small cuboid	6061 Al
1	small cuboid	4130 steel
1	1" x 1.625" OD disc	6061 Al

tools

cutters

center drills

count	maj diameter	min diameter	wear
1	7/16"	3/16"	none
1	5/16"	1/8"	none
1	1/4"	7/64"	none
1	3/16"	5/64"	none
1	1/8"	3/64"	none

router

count	size	length	shank	flutes	desc	state
1	1/4"	1"	1/4"	2	carbide end mill	new
1	1/4"	1"	1/4"	2	carbide end mill	used

mill

count	size	length	shank	flutes	desc	state
1	1/2"	13/16"	1/2"	2	TiN coated HSS double end mill	new
1	1/2"	13/16"	1/2"	2	HSS double end mill	used
1	1/4"	1/2"	3/8"	2	HSS double end mill for Al	used

thread tap

count	type	thread	state
1	starting	6-32	used
1	bottoming	6-32	used

misc

count	desc	state
1	2fl 90 deg 1/4" carbide chamfer mill	used
1	6fl 90 deg 1" countersink bit	new

misc

commercial

count	desc	state
1	12-piece needle file set	unused
1	0.2" edge finder	no wear
4 (nos. 6, 8, 10, 12)	drill & countersink combo bits	no wear
1	hex key for countersink bits	no wear
1	6", 150mm; 0.0005", 0.01mm calipers	no wear
1	carbide-tip scriber	no wear
1	10ft tape measure	used
1	indicator mount with 3/8" ID hole	modified
1	magnetic base	no wear

improvised

count	desc
1	pen tube
1	1.5" OD, 1" brass cylinder
1	~12" acrylic straight edge
4	shelf supports
1	5/16"-18, 5/8" OD adapter for indicator arm