Evenheat 810 Kiln: Difference between revisions
From Pumping Station One
No edit summary |
m add photo, edit |
||
| Line 1: | Line 1: | ||
{{Template:EquipmentPage |owner=PS:One |model=Evenheat 810 |serial=38008 |arrived=2010 |doesitwork=Yes | {{Template:EquipmentPage | ||
|owner=PS:One | |||
|model=Evenheat 810 | |||
|serial=38008 | |||
|arrived=2010 | |||
|doesitwork=Yes | |||
|where=Small Metals | |||
|certification=yes | |||
|hackable=no | |||
|value=$865 | |||
|hostarea=Small Metals | |||
|image=Evenheat-810-kiln.jpg | |||
}} | |||
== History == | == History == | ||
Revision as of 18:53, 29 January 2019
 | |
| Owner/Loaner | PS:One |
|---|---|
| Serial Number | 38008 |
| Make/Model | Evenheat 810 |
| Arrival Date | 2010 |
| Usability | Yes |
| Contact | {{{contact}}} |
| Where | Small Metals |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | $865 |
| Host Area | Small Metals |
History
On 1/28/2013 this was tested to at least power up and create heat.
3/3/2014. Inspect and test all mechanical and electrical components.
Remove upper switch, disassemble, clean contacts, reassemble and reinstall.
All components appear to works as intended.
Heating Profile
On 3/3/2014 I ran the kiln using a PID temperature controller set to 2200f.
Room temp to 500f. 7 min.
Room temp to 1000f. 17 min.
Room temp to 1500f. 40 min.
Room temp to 2000f. 95 min.
