Johnson Bandsaw: Difference between revisions
From Pumping Station One
| Line 16: | Line 16: | ||
== Status == | == Status == | ||
12/10/16 * A VFD has been fitted, this allows the machine to run on a 110v circuit and an variable speed control. The RPM display shows the RPM of the drive wheel (16"), the blade speed will be approx. 2.7 * RPM. The power switch on the left side applies power to the VFD. The on/off button on the front panel controls the blade and serves as an emergency switch, pull for on push for off. The dial controls RPM. | 12/10/16 * A VFD has been fitted, this allows the machine to run on a 110v circuit and an variable speed control. The RPM display shows the RPM of the drive wheel (16"), the blade speed will be approx. 2.7 * RPM. The power switch on the left side applies power to the VFD. The on/off button on the front panel controls the blade and serves as an emergency switch, pull for on push for off. The dial controls RPM. | ||
Open Tasks: 1. Label control box | Open Tasks: 1. Label control box 2. Modify gear cover or fabricate new one. 3. Wire end=of-cut switch to control box. | ||
- Jim Brink | - Jim Brink | ||
