Epilog 30w Mini 24 Laser Engraver: Difference between revisions
From Pumping Station One
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
| serial=SERIAL NUMBER | | serial=SERIAL NUMBER | ||
| arrived=6/29/2011 | | arrived=6/29/2011 | ||
| doesitwork= | | doesitwork=no | ||
| contact=[[CNC|CNC Area Host]] | | contact=[[CNC|CNC Area Host]] | ||
| where=Main shop floor, just outside kitchen | | where=Main shop floor, just outside kitchen | ||
| Line 16: | Line 16: | ||
== Status == | == Status == | ||
Repaired and working as of 11/18/2016. | Now: as of 11/18/2016 Broken, displays the error "Disabled: x axis" | ||
Old: Repaired and working as of 11/18/2016. | |||
The Epilog uses the inline exhaust fan through the roof, the switch for that is wired into a box on an orange extension cord; the fume extractor is not currently being used with the laser. You must use air assist (compressed air) and the exhaust fan whenever you use the laser. | The Epilog uses the inline exhaust fan through the roof, the switch for that is wired into a box on an orange extension cord; the fume extractor is not currently being used with the laser. You must use air assist (compressed air) and the exhaust fan whenever you use the laser. | ||
