Lulzbot Taz3: Difference between revisions
From Pumping Station One
No edit summary |
|||
| Line 6: | Line 6: | ||
|serial = KT-PR0013-5509 | |serial = KT-PR0013-5509 | ||
|arrived = January 2014 | |arrived = January 2014 | ||
|doesitwork = | |doesitwork = no | ||
|contact = [[CNC|CNC Area Host]] | |contact = [[CNC|CNC Area Host]] | ||
|where = [[CNC]] 2nd Floor | |where = [[CNC]] 2nd Floor | ||
| Line 15: | Line 15: | ||
== Status == | == Status == | ||
As of 12/20/2015 Someone has put a note saying "no work" on the print bed, no further information known. | |||
As of 12/10/2015 Undergoing testing. Functional. New LCD installed, SD card reader should be working but has not been tested in use. Fiberglass flexible print bed add-on installed. Firmware updated for new Hexagon extruder heads, no longer compatible with Flexistruder, for now. Hexagon heads need to be set higher than old heads (temperatures will need to be higher.) Additional testing required to advise what temperatures are best. --[[User:Rdoeksen|Rdoeksen]] ([[User talk:Rdoeksen|talk]]) 16:17, 10 December 2015 (CST) | As of 12/10/2015 Undergoing testing. Functional. New LCD installed, SD card reader should be working but has not been tested in use. Fiberglass flexible print bed add-on installed. Firmware updated for new Hexagon extruder heads, no longer compatible with Flexistruder, for now. Hexagon heads need to be set higher than old heads (temperatures will need to be higher.) Additional testing required to advise what temperatures are best. --[[User:Rdoeksen|Rdoeksen]] ([[User talk:Rdoeksen|talk]]) 16:17, 10 December 2015 (CST) | ||
