Category:CNC: Difference between revisions

Revision as of 13:26, 19 December 2015


CNC
Hosted Since:
Location:	All over
Equipment:	Category:CNC
Area Host Contact Details
Name:	Andrew Camardella
Phone:
Email:	camardea at gmail.com
Other Contact:
Office Hours:	Will be updated soon!
Certifications:

Computer Numeric Control: computerized tools for manufacturing and crafting.

Rules

Safety

Tools Available

Supplies

Supplies are generally not provided. There are some PS1-owned bits in the drawer for the ShopBot, there is often some common-use filament available for the TAZ3, AO-100 or Replicator 3D printers, but you may also used your own if you want to be confident that you'll have enough high-quality filament for your project. Filament can be purchased at MicroCenter and other retailers for about $20 per spool. Filament can be purchased for the Cube printer for about $100 per cartridge.

All machines, including the vinyl cutter and large format printers, should have information about their consumables listed on their respective wiki page.

There is a donation box next to the Cube printer for filament; suggested donation for Cube filament is 30 cents per gram.

Certifications

Pages in category "CNC"

The following 24 pages are in this category, out of 24 total.

@@ Line 31: / Line 31: @@
 * [[Shopbot PRS CNC router]]
 * [[Cubify Sense 3d Scanner]]
+* [[3dSystems CubePro|3dSystems CubeProTrio 3D printer]]
 == Supplies ==
-Supplies will be ordered every Friday, sooner if it's an urgent need. Please email cahira_mirrored [at] yahoo [com] and include "CNC Area" in the subject line.
+Supplies are generally not provided. There are some PS1-owned bits in the drawer for the ShopBot, there is often some common-use filament available for the TAZ3, AO-100 or Replicator 3D printers, but you may also used your own if you want to be confident that you'll have enough high-quality filament for your project. Filament can be purchased at MicroCenter and other retailers for about $20 per spool. Filament can be purchased for the Cube printer for about $100 per cartridge.
+All machines, including the vinyl cutter and large format printers, should have information about their consumables listed on their respective wiki page.
+There is a donation box next to the Cube printer for filament; suggested donation for Cube filament is 30 cents per gram.
 == Certifications ==