Shopbot PRS CNC router: Difference between revisions
From Pumping Station One
No edit summary |
|||
| Line 407: | Line 407: | ||
I found a couple more problems when testing all the limits. When I took the gantry to X maximum, the dust collector hose pulled off! I put it back on, but I'm not sure how stable this is. Also, when I originally set the Y maximum and minimum, I wanted as much spindle travel as possible. But it appears that if you're at the Y max and move in the X direction, you can hit the middle support with the dust collector boot. We've got several inches Y travel beyond the nominal 48", so we may want to look into reducing this to clear the supports. | I found a couple more problems when testing all the limits. When I took the gantry to X maximum, the dust collector hose pulled off! I put it back on, but I'm not sure how stable this is. Also, when I originally set the Y maximum and minimum, I wanted as much spindle travel as possible. But it appears that if you're at the Y max and move in the X direction, you can hit the middle support with the dust collector boot. We've got several inches Y travel beyond the nominal 48", so we may want to look into reducing this to clear the supports. | ||
== Resources == | |||
[[File:ShopBot PSOne Post Processors.zip|ShopBot PSOne Post Processors.zip]] - Post Processors for Vectric Aspire and VCarve Pro 8.0 which include the change to check that the spindle actually started. | |||
[[Category:Fabrication]] | [[Category:Fabrication]] | ||
[[Category:CNC]] | [[Category:CNC]] | ||
[[Category:Future Things Bus Data Sources]] | [[Category:Future Things Bus Data Sources]] | ||
