DoAll Bandsaw: Difference between revisions
From Pumping Station One
No edit summary |
|||
| Line 4: | Line 4: | ||
|hackable = no | |hackable = no | ||
|model = DoAll 16-2 | |model = DoAll 16-2 | ||
|serial = | |serial = 45-55525 | ||
|arrived = 9/19/14 | |arrived = 9/19/14 | ||
|doesitwork = soon | |doesitwork = soon | ||
Revision as of 23:05, 29 September 2014
 | This tool is currently broken, please contact the area host for more information. |
| Owner/Loaner | PS:One |
|---|---|
| Serial Number | 45-55525 |
| Make/Model | DoAll 16-2 |
| Arrival Date | 9/19/14 |
| Usability | soon |
| Contact | Dean Anderson |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | 900 |
| Host Area | {{{hostarea}}} |
This tool requires certification for use.
Specifications
| Capacity | 16" from the blade to the column |
| Blade Size | 120" blade. Width can be up to 1". Each blade width requires a set of four hardened steel guides. We don't have guides for blades wider than 1/2". |
| Blade Speed | approximately 45 to 1600 FPM, continuously variable. |
| Power | 240V, 3 phase |
| Weight | 1500-2000 pounds |
| Mfg. Date | 1955 |
Blades
Installed:
To-Do
Install new blade.
Change oil in transmission.
Replace thrust bearings in blade guide.
Blade welder is missing the grinder motor. The welder has not been tested. The 20 amp plug/outlet may not be sufficient.
Maintenance
| Description | Frequency | Lubricant | Instructions | History |
|---|---|---|---|---|
| Gear Box | manual says 16-2: SAE 10 motor oil, 1612: SAE 20 ; DoAll support says use SAE 20 motor oil | |||
| Reeves drive shaft (oil cup) | 1612: SAE 10 |
Equipment
| Item | Description | Supplier | Cost |
|---|---|---|---|
| Guide thrust bearing | 626ZZ 6x19x6mm (2 required) |
References
List of Currently Certified Users
| Qualified Member | Trained By |
|---|---|
| Dean Anderson | |
