Forge: Difference between revisions
From Pumping Station One
Amishhammer (talk | contribs) |
|||
| Line 30: | Line 30: | ||
# Make sure the burner valves are completely closed!! | # Make sure the burner valves are completely closed!! | ||
# Turn on the valve for the propane tank | # Turn on the valve for the propane tank | ||
# Adjust the pressure regulator on the tank to 10PSI. - If the pressure is | # Adjust the pressure regulator on the tank to 10PSI. - If the pressure is too high you will have to open a burner valve slightly to let some pressure out. | ||
# Place a lit piece of paper into the forge | # Place a lit piece of paper into the forge | ||
# Making sure the paper is still alight, slightly open the valve for the front burner and allow the forge to light | # Making sure the paper is still alight, slightly open the valve for the front burner and allow the forge to light | ||
| Line 40: | Line 40: | ||
# If you require the second burner open the valve for the rear burner 1/8th of a turn and allow it to light | # If you require the second burner open the valve for the rear burner 1/8th of a turn and allow it to light | ||
# Adjust the valve to get a constant flame as you did for the first | # Adjust the valve to get a constant flame as you did for the first | ||
== Important Information Regarding the Forge == | == Important Information Regarding the Forge == | ||
