Epilog 30w Mini 24 Laser Engraver: Difference between revisions
From Pumping Station One
→Safe Materials: MSDS of gator foam says it mays produce HBr and HCl when burning |
|||
| Line 73: | Line 73: | ||
** Solid Styrene : Smokes a lot when cut, but can be cut. Keep it thin (1/16") | ** Solid Styrene : Smokes a lot when cut, but can be cut. Keep it thin (1/16") | ||
** Depron foam: Used a lot for hobby, RC aircraft, architectural models, and toys. 1/4" cuts nicely, with a smooth edge. Must be constantly monitored when cutting. | ** Depron foam: Used a lot for hobby, RC aircraft, architectural models, and toys. 1/4" cuts nicely, with a smooth edge. Must be constantly monitored when cutting. | ||
** Cloth (leather, suede, felt, hemp, cotton, polyester, but NEVER vinyl or pleather-- see above) They all cut well. Leather is very hard to cut, but can be if it's thinner than a belt (call it 1/8") | ** Cloth (leather, suede, felt, hemp, cotton, polyester, but NEVER vinyl or pleather-- see above) They all cut well. Leather is very hard to cut, but can be if it's thinner than a belt (call it 1/8") | ||
** Magnetic Sheet material cuts beautifully (make SURE it does NOT contain chlorine, see above) | ** Magnetic Sheet material cuts beautifully (make SURE it does NOT contain chlorine, see above) | ||
